Visit My eBay Store These are similar to the bags on my other listing but have extra reinforcing webbing sewn around the sides and across the top. The carrying strap is also attached to the webbing on the ends of the bag. Features1. Constructed of vinyl coated nylon.2. 2 inch wide nylon adjustable carrying strap. Extends so can be shoulder carried. 3. 3 each 2″ wide nylon strips sewn to bottom of bag to protect from wear.4. Large flap which covers the top of the bag and is fastened shut with a large strip of hook & loop.5. 8 ea. outside pockets, ( 4 on each end ).6. Large clear vinyl pocket on inside of flap secured closed by a strip of hook & loop. Good for manuals, spec sheets, etc. 7. 2 ea. 16″ x 10″ inside pockets, ( 1 on each side ).8. The walls of inner compartment have hardboard sewn in them to keep the tool bag expanded.9. The bottom of the bag also has hardboard inside which is enclosed completely by vinyl coated nylon.10. 4 ea. inside pockets, ( 2 on each end ).11. 15 ea. tool loops.12. Open space between tool loops is 15″x4″x10″. For power tools, testers, hand tools, etc.13. Nylon webbing sewn across top and on sides for added protection.14. Outside dimensions 17″L x 7″W x 10″H.

Visit My eBay Store These bags are new and are loaded with features that most tool bags don’t offer. These bags were made for Boeing and I assume that the manufacturer was Estex because they were in bulk boxes with their name on the outside of the boxes. Their name, however, is not printed on the bags, which leads me to believe that they did a custom order using Boeing’s design. That is just my opinion and could be true or not. They are very well constructed and should hold up well. Below is a list of features found on these bags. The wgt. of the bag itself is 5 lbs.Check my store for another version of this same bag (stronger). 1. Constructed of vinyl coated nylon.2. 2 inch wide nylon adjustable carrying strap. Extends so can be shoulder carried. 3. 3 each 2″ wide nylon strips sewn to bottom of bag to protect from wear.4. Large flap which covers the top of the bag and is fastened with a large strip of hook & loop.5. 8 ea. outside pockets, ( 4 on each end ).6. Large clear vinyl pocket on inside of flap secured closed by a strip of hook & loop. Good for manuals, spec sheets, etc. 7. 2 ea. 16″ x 10″ inside pockets, ( 1 on each side ).8. The walls of inner compartment have hardboard sewn in them to keep the tool bag expanded.9. The bottom of the bag also has hardboard inside which is enclosed completely by vinyl coated nylon.10. 4 ea. inside pockets, ( 2 on each end ).11. 15 ea. tool loops.12. Open space between tool loops is 15″x4″x10″. For power tools, testers, hand tools, etc.