Payment Shipping Returns We ONLY accept PayPal payment. If you are bidding or ordering more than one item, the items will be combined into one order automatically thus you can pay altogether. If you want not to combine, please buy one and immediately pay one separately. Please pay what you win in 7 days. Unpaid Dispute will be automatically open if payment is not received after 7 days. If you pay the bill after received unpaid dispute, please email us to close the unpaid dispute. Because the unpaid dispute will not be closed automatically, and we may ignore it. The buyer is responsible for any applicable import duties and local taxes. Please verify with your customs before making your purchase. Please verify your address during checkout. We are not responsible for any wrong or undeliverable addresses. We are committed to give you the best customer service possible. If for any reason you are unsatisfied with a purchase, please contact us and we’ll assist you with a prompt solution. Please let us work on the issues. We’d like to settle any problem in a friendly manner. Please do not open a case on eBay or PayPal, or leave any negative or neutral feedbacks directly! We always reply to messages within 2 business days (off-duty at weekend). Due to the difference of time zone between Hong Kong and your location, sometimes the answer will be delayed. If you do not get a response from us after 2 business days, please check your junk or spam mailbox. Unsatisfied product can be returned within 30 days from the delivery date. We can offer a full refund or exchange, but we are not responsible for return shipping cost. Please contact us to get a RMA number before sending out your return. Feedback: 1. Since your feedback is very important to our business’s development, we sincerely invite you to leave positive feedback with four 5-Detailed Selling Rating (DSR) to us basing on your satisfaction with our commodity and service. It’s just take you 1 minute. 2. Unfortunately, If you are planning to give us a neutral/negative feedback because of your bad buying experience with us, please contact us at any time so as to clear up your discontent and resolve the problem. Featured Products People always bought together with
Veto Pro Pac Tool Belt Lifter/Suspender Padded Nylon Adjustable
Veto Pro Pac Tool Belt Lifter/Suspender Padded Nylon Adjustable OVERVIEW:The Belt Lifters (suspenders), worn on the shoulders, provide a padded harness for the shoulders, with front and back adjustable straps clipped to 4 leather locking straps. Through the leather straps, the harness easily connects to the loaded tool belt, distributing weight off one’s hips, sharing the load across the shoulders. It also comes with an adjustable chest strap and 2 metal tape measure clips that are conveniently chest-located on either side of the padded harness for quick and easy tape measure access. The BT-LT Belt Lifters may be used with our Builders Belt. SPECIFICATIONS:ADDED NYLON ADJUSTABLE SUSPENDERS WITH CHEST STRAP, LEATHER BELT LOOPS AND STAINLESS STEEL CLIPS: Over the shoulder padded harness with carrying grip and 1″ ‘hang up» D Ring.2 stainless steel tape measure clips on suspender front adjustable chest strap.Adjustable webbed straps for proper location and adjustment.4 leather securing loops to feed belt through to connect and support weighted belt.
Veto Pro Pac TA-WB Tool Waist Apron
Veto Pro Pac TA-WB Tool Waist ApronAlways within reach! The Veto Pro Pac Tool Waist Apron is made for light duty or bench work. It conveniently adjusts to different waist sizes and includes (8) vertical tool pockets, (2) fastener pockets, and (4) pencil, punch, and bit pockets.FeaturesThis tool apron was designed with tough durable polyester canvas. With (2) hammer holder loops for right or left-handed work, and a metal tape measure clip and tape pocket, it is well equipped. Best of all it comes with a 5-year warranty.Veto Pro PacWhile VETO PRO PAC tool bags could be considered soft bags they don’t wilt and lose their shape like canvas or other synthetic bags. That’s because every PRO PAC tool bag uses a patented integrated center panel that extends to the very bottom of the bag. This allows for easy access and balances your load distribution effectively keeping you from becoming a regular at the chiropractor’s office. Speaking of pain, the place where your burly hand makes contact with the tool bag is typically where discomfort can put a damper on any quitting time. But we don’t do typically too well around here. The handle on VETO PRO PAC tool bags is unlike any you’ve experienced. It’s ergonomically designed for stiff hands and is hinged through the fabric for extra durability. It also collapses front or back depending on how you set it up. Bonus! Dimensions (W x H):22.5” x 10″Weight:2 lbsVertical Tool Pockets:8 Tool PocketsFastener Pockets:2Pencil, Punch and Bit Pockets:4Tape Measure Clip:MetalTape Pocket:YesHammer Holder Loops For Left & Right Handed:2Material:Tough, Durable Polyester CanvasWarranty:5 Years (see Veto warranty terms and conditions)
Veto Pro Pac TP-XXL Blackout Tool Pouch
Veto Pro Pac TP-XXL Blackout Tool Pouch DescriptionThe TP-XXL BLACKOUT is a closable extra-large tool pouch designed with integral side mounted padded meter pockets. Each zippered meter pocket will securely fit meters up to 10″ (260mm) x 3.5″ (90mm) x 2″ (50mm). The all-black tactical construction of the BLACKOUT edition discretely conceals additional V-SWAP capabilities. V-SWAP panels inside the TP-XXL BLACKOUT enable the removal of all internal pockets to create a custom layout, easy clean-out and/or the storing of larger equipment in addition to a variety of tools, meters, fasteners, small tablet computer. The TP-XXL BLACKOUT edition comes with the V-SWAP Front Tool Panel, V-SWAP Rear Tool Panel, and the V-SWAP 2-Bit @ 4-Bit Pocket Panels. Additional panels are available and sold separately below. FeaturesMaximized Tool Storage Capacity:47 available pocketsTactical all-black constructionV-SWAP removable tool pocket panel systemIncludes rear tablet pocket & 2 padded meter pockets“Hang-up” hook – accessible while open and closedOver-molded rubber gripPadded shoulder strapYKK zippersHigh Impact Polypropylene plastic base5 Year limited warrantySpecificationsHeight (H): 15″ (38cm)Width (W): 15″ (38cm)Depth (D): 8″ (20.5cm)Handle Height (HH): 22in/56cmWeight (empty): 7lbs/3.25kgInternal Volume: 710in3/12LMax Payload: 30lbs/14kg Tablet Pocket Dimensions:Height: 11″Width: 9″
Veto Pro Pac Builder Tool Belt Padded Leather & Nylon Adjustable
Veto Pro Pac Builder Tool Belt Padded Leather & Nylon Adjustable OVERVIEW:The Builders Belt is a padded leather and nylon, adjustable tool belt for carpenters or other tradesmen that need to carry tools and fasteners around their waist. The padded waist belt can adjust for waist sizes from 32″ to 46″ to support the separate Hammer Holder (HH1), Fastener Pouch and Tool Pouch. The Hammer Holder (HH1) and both pouches are designed for left or right-hand use. The pouches can swap sides, one or both can be removed from the belt, and/or swapped with the Hammer Holder (HH1). A set of suspenders we call Belt Lifters (BT-LT) are sold separately and can be attached to the padded belt and worn over the shoulders to help in carrying the weight of a loaded Builders Belt. An additional Hammer Holder (HH1) may also be purchased separately or worn on a waist belt. PRODUCT SPECIFICATIONS:PADDED LEATHER AND NYLON, ADJUSTABLE TOOL BELT WITH TOOL AND FASTENER POUCHES:WAIST SIZE RANGE: 32″ – 46″ (81cm – 117cm)Comes with an adjustable belt, tool pouch, fastener pouch, and leather hammer and tool holder.Tool Pouch – Padded nylon with mirror image hammer loops to wear either left or right wide, includes speed square, tape measure clip and multiple tool pockets.Fastener Pouch – Padded nylon with 3 fastener pockets, includes additional pockets for smart phone, speed square, tools and bits, and a stainless steel clip for a tape measure.Includes leather hammer holder with stamped steel riveted hammer holder and tool loop (also available for additional purchase).
Veto Pro Pac TP-XXL Camo Extra Large Tool Pouch Camo DNA
Veto Pro Pac TP-XXL Camo Extra Large Tool Pouch Camo DNA DescriptionThe TP-XXL CAMO DNA is a closable extra-large tool pouch designed with integral side mounted padded meter pockets. Each zippered meter pocket will securely fit meters up to 10″ (260mm) x 3.5″ (90mm) x 2″ (50mm). Display the love of the outdoors with Mossy Oak (R) Country DNA fabric. The TP-XXL can be customized to hold a variety of tools, meters, fasteners, small tablet computer, and additional components. FeaturesMaximized Tool Storage Capacity:Mossy Oak Country DNA Pattern46 total exterior and interior pocketsV-SWAP™ removable tool pocket panel systemIncludes rear tablet pocket & 2 padded meter pockets“Hang-up” hook – accessible while open and closedOver-molded rubber gripPadded shoulder strapYKK® zippersHigh Impact Polypropylene plastic base5 Year limited warrantySpecificationsHeight (H): 15″ (38cm)Width (W): 15″ (38cm)Depth (D): 8″ (20.5cm)Handle Height (HH): 22in/56cmWeight (empty): 6 lbs (2.75kg)Internal Volume: 710in3/12LMax Payload: 30lbs/14kg Tablet Pocket Dimensions:Height: 11″Width: 9″
Veto Pro Pac Tech-LCT Wheeler Tall Wheeled Bag
Veto Pro Pac Tech-LCT Wheeler Tall Wheeled Bag DescriptionFull Featured Service Tech Tool Bag with Wheels & Retractable Handle. The TECH-LCT WHEELER is a rolling version of the tried and true TECH-LC tool bag, but with an extra 2 inches of vertical height for storing longer tools. Featuring additional volume capacity and Veto Pro Pac’s proprietary V-SWAP™ system, the TECH-LCT WHEELER provides a versatile tool storage, organizing and wheeled transport system. The bag comes with innovative V-SWAP removable Tool (mandatory) and Meter pocket panels to allow for customization. While the Tool panel must remain in the bag, the Meter panel is easily swapped out with optional Laptop and Bulk Storage panels, which are available and sold separately. FeaturesMaximized Tool Storage Capacity:Large front & back zippered storage bays keep tools safe & secure61 interior and exterior tool pockets of varying sizesV-SWAP™ removable tool pocket panel system with alternate tool panels available & sold separatelyFront tool panel includes removable sub-panels for interior customization and storing of larger toolsWaterproof Polypropylene plastic base with integral 5″(13cm) wheels and trolley systemThermoformed protective backside with hinged rub railsMetal YKK locking zippers8” Electrical tape strapInterior gray pockets for better visibilityMagnetic screw catchersOther Features:Warranty: 5 Years (see Veto warranty terms and conditions)SpecificationsHeight (H): 21″ (53cm)Width (W): 17″ (43cm)Depth (D): 12.5″ (32cm)Handle Height (HH): 24.5in/62cmWeight (empty): 19lbs/8.6kgInternal Volume: 2375in3/39LMax Payload: 90lbs/41kg
Veto Pro Pac PB3 Variety Pack
Veto Pro Pac PB3 Variety Pack DescriptionCan’t decide which PB size will best suit your small parts and tool storage needs? Choose this variety pac and get one of each size. One PB4, one PB4L, and one PB5. FeaturesMaximized Tool Storage Capacity:Pac of 3 different sized pouches; small, medium & largeMulti-purpose for jobsite and everyday useZippered accessStores small tools, fasteners, wire nuts and other assorted itemsYKK™ Zippers & 600 Denier Nylon body FabricTransparent side coated mesh panelEasy to identify color-coded webbingSwivel snap hooks attach to tool bag D-Rings Other Features:Warranty: 5 Years (see Veto warranty terms and conditions) SpecificationsHeight (H): PB4: 7″/18cm; PB4L: 9″/23cm; PB5: 5″/12.5cmWidth (W): PB4: 10.75″/27cm; PB4L: 12″/30.5cm; PB5: 9″/22cmDepth (D): PB4: .5″/1cm; PB4L: .5″/1cm; PB5: .5″/1cm
Veto Pro Pac TMBF Tool Panel for Tech MCT Blackout
Veto Pro Pac TMBF Tool Panel for Tech MCT Blackout DescriptionThe V-Swap tool panel has numerous pockets for hand tools, bits, pencils, etc. at easy reach inside your bag. FeaturesFeatures 20 pockets for tools, pencils, etc.Removable w/two rings to hold solidly in your Tech MCT BagPanel only for your Tech MCT Bag1 panel – 2 panels needed for your Tech MCT Bag (sold separately)SpecificationsHeight (H) : 13” (33cm)Width (W): 10.5″ (26.5cm)Total Number of Pockets: 20
Veto Pro Pac TR1 Tool Roll
Veto Pro Pac TR1 Tool Roll DescriptionHandmade in New England (USA), the TR1 roll is ideal for storing and protecting meter test leads and specialty probes. It is also a handy little pouch for small tools and instruments. The TR1 is a ruggedly built tool roll with 4 individual zippered pockets all constructed with durable mesh for breathability. The 2 lower pockets are lined with vinyl for protecting sensitive probe tips. The aluminum hook for securing the tool roll closed can double as a hook for hanging the open roll. Our stainless steel Repositionable Belt Clip (RBC – sold separately) can also be added to the rear webbing loop for attaching to a waist belt or side of tool bag. FeaturesMaximized Tool Storage Capacity:Dimensions (H x W x D): 20.5 in. (unrolled) x 7.5 in. x .5 in.Maximum Payload: 5 lb.Compact design for spare leads/varied probesRugged constructionAluminum hardware4 zippered pockets – 2 breathable mesh/2 vinyl-lined meshOther Features:Warranty: 5 Years (see Veto warranty terms and conditions)SpecificationsBag Height (H): 20.5” (52cm) – unrolledWidth (W): 7.5″ (19cm)Depth (D): .5″ (1.25cm)Weight (empty): .4 lb (.2kg)Max Payload: 5lbs/2.25kg